Hello Guest it is May 04, 2025, 07:16:34 PM
Profile Guest
« previous next »
Pages: 1 2 »   Go Down

Author Topic: Mach 4 Hobby Demo build 1767 is available  (Read 14993 times)

0 Members and 1 Guest are viewing this topic.

Offline smurph

*
  • *
  • 1,574 1,574
  • "That there... that's an RV."
Mach 4 Hobby Demo build 1767 is available
« on: May 13, 2014, 02:42:28 AM »
Build 1767:

http://www.machsupport.com/wp-content/uploads/2014/04/Mach4Hobby%20Installer-1767.exe

The plugin file extensions have been changed from "dll" to "mp4w".
The keyboard plugin has been reworked to only affect the Mach GUI.  If Mach loses focus, the keyboard driven action/input will stop.  

Steve
« Last Edit: May 14, 2014, 01:58:00 PM by Overloaded »
Logged

Offline GRAYHIL

*
  • 202 202
Re: Mach 4 Hobby Demo build 1767 is available
« Reply #1 on: May 13, 2014, 05:35:47 AM »
STEVE
This link goes to 1762 not 1767
Graham
Logged

Offline Ya-Nvr-No

*
  • 992 992
Re: Mach 4 Hobby Demo build 1767 is available
« Reply #2 on: May 13, 2014, 06:41:00 AM »
Logged

Offline Overloaded

*
  • *
  • 4,923 4,923
Re: Mach 4 Hobby Demo build 1767 is available
« Reply #3 on: May 13, 2014, 07:47:56 AM »
Something appears to be damaged in jogging.
Will not jog from screen buttons.
Will not Ref All Home.
« Last Edit: May 13, 2014, 07:50:37 AM by Overloaded »
Logged

Offline Overloaded

*
  • *
  • 4,923 4,923
Re: Mach 4 Hobby Demo build 1767 is available
« Reply #4 on: May 13, 2014, 07:55:26 AM »
All File ops and some Run Ops are disabled ... grayed out.

You sure this is the right 1767 release ?
Russ
Logged

Offline Ya-Nvr-No

*
  • 992 992
Re: Mach 4 Hobby Demo build 1767 is available
« Reply #5 on: May 13, 2014, 08:01:00 AM »
no,  :-X
Logged

Offline Overloaded

*
  • *
  • 4,923 4,923
Re: Mach 4 Hobby Demo build 1767 is available
« Reply #6 on: May 13, 2014, 08:11:35 AM »
ok, much weirdness, going back to 62 for now.
Dro's don't show movement, only updates the position when Left goes UP.

Russ
« Last Edit: May 13, 2014, 08:13:27 AM by Overloaded »
Logged

Offline smurph

*
  • *
  • 1,574 1,574
  • "That there... that's an RV."
Re: Mach 4 Hobby Demo build 1767 is available
« Reply #7 on: May 13, 2014, 06:19:21 PM »
There is a new 1767 out there now.  It should be better.  There were some "issues" in the original.  

Also, the greyed out screen buttons were testing the "Enabled States" property.  There is still a slight issue with that which I'm working on now.  Just clear the Enabled States property on the controls that are not working correctly and that should clear them up.

Steve
« Last Edit: May 13, 2014, 06:21:36 PM by smurph »
Logged

Offline Overloaded

*
  • *
  • 4,923 4,923
Re: Mach 4 Hobby Demo build 1767 is available
« Reply #8 on: May 13, 2014, 06:43:30 PM »
Quote from: smurph on May 13, 2014, 06:19:21 PM
There is a new 1767 out there now.  

Steve

Out there ? Out where ?  ::)

Russ
 :)
Logged

Offline smurph

*
  • *
  • 1,574 1,574
  • "That there... that's an RV."
Re: Mach 4 Hobby Demo build 1767 is available
« Reply #9 on: May 14, 2014, 01:45:30 PM »
On the MachSupport website.  I gave the link above but botched the build number.  I can't edit that post for some reason...  So here it is again.  This is the same link that you will get to if you download Mach 4 from the website by hitting the download button.

http://www.machsupport.com/wp-content/uploads/2014/04/Mach4Hobby%20Installer-1767.exe

Steve
Logged
Pages: 1 2 »   Go Up
« previous next »