Hello Guest it is March 28, 2024, 09:52:31 AM

Author Topic: Output LEDs  (Read 2510 times)

0 Members and 1 Guest are viewing this topic.

Output LEDs
« on: March 16, 2007, 03:01:09 PM »
I'm new to this, so hopefully this is really simple.

I downloaded the 1024.set screens.  When I go to the diagnostics screen and click on any of the spindle, flood, or mist toggles - Output #1 LED flashes.  The code for the toggles seems correct, and the code for the LEDs 1-3 seem right - so why do I have this problem?
Re: Output LEDs
« Reply #1 on: March 18, 2007, 10:06:38 AM »
Under the ports and pins (spindle Tab) is where you set the output that is running the spindle...
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com