Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Flipz01 on March 16, 2007, 03:01:09 PM
-
I'm new to this, so hopefully this is really simple.
I downloaded the 1024.set screens. When I go to the diagnostics screen and click on any of the spindle, flood, or mist toggles - Output #1 LED flashes. The code for the toggles seems correct, and the code for the LEDs 1-3 seem right - so why do I have this problem?
-
Under the ports and pins (spindle Tab) is where you set the output that is running the spindle...