Hello Guest it is March 29, 2024, 01:29:06 AM

Author Topic: shuttlepro plugin  (Read 6347 times)

0 Members and 1 Guest are viewing this topic.

shuttlepro plugin
« on: March 15, 2007, 03:15:57 AM »
Hello everybody,

I'm new new on this forum because I never had any problem with the Mach software.

But I have a shuttlepro since some years for video editing, but it comes from "Hercules" ( www.hercules.com ).
When i try to make it work in Mach3, nothing happens. I don't know what to do to make it work.
The vendor ID for my device is :

USB\VID_0B33&PID_0011&REV_0100
USB\VID_0B33&PID_0011

Can somebody help me to make it work?

Besr regards

Re: shuttlepro plugin
« Reply #1 on: March 15, 2007, 08:43:50 AM »
I don't know if the old ones are going to work :( The hardware ID is not the same and I don't even know if the data is in the same order... Best thing you can do is get a new one for mach3.

Sorry about that
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: shuttlepro plugin
« Reply #2 on: March 15, 2007, 09:42:20 AM »
OK
thanks for that quick answer.
I will buy a new one immediately
Re: shuttlepro plugin
« Reply #3 on: March 24, 2007, 02:52:54 AM »
Is the shuttlepro version 2 the only model that works with the plugin written for mach3??   Or does the silver shuttlepro work with it?
Re: shuttlepro plugin
« Reply #4 on: March 24, 2007, 11:34:38 PM »
Yes it is the only one that works well
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline Greolt

*
  •  956 956
    • View Profile
Re: shuttlepro plugin
« Reply #5 on: March 25, 2007, 04:43:42 AM »

Regarding Cont/ Inc mode for the center ring.

It defaults to Continuous mode. Can I make it default to Incremental?

Reasons are twofold.

I use the outer ring for continuous type movement and use the inner ring for sneaking up on edges etc.

I would prefer to not devote a button to select Incremental.

In other words I only want it to work as Incremental and not Continuous.

Greg
Re: shuttlepro plugin
« Reply #6 on: March 25, 2007, 09:00:20 AM »
There is not a setting for that :( but you could set Mach 3 to be in inc mode by default (just change it on the tab screen) and I think that will do it. Or are you talking about the center dial? If so we would have to change that in the plugin.
thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline Greolt

*
  •  956 956
    • View Profile
Re: shuttlepro plugin
« Reply #7 on: March 26, 2007, 01:36:34 AM »

OK Brian can I make a request that the option to have Incremental as the default be included.  ;D

Greg
Re: shuttlepro plugin
« Reply #8 on: March 26, 2007, 01:38:37 PM »
I knew you were going to do that! ;) I don't have a shuttle at this time so I have no way of testing it :( I will see if I can order a new one at some point.

Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: shuttlepro plugin
« Reply #9 on: March 29, 2007, 11:44:15 PM »
Hi, Brian,

I also would like to add my vote to the request that the inner knob be selectively made incremental. It just makes sense: you jog coarse with the outer ring, and then you sneak up on the touch-off with the inner ring. That would be a great addition to the Plugin!

Thanks!

-Pat-
There are no shortcuts to anyplace worth going.