Hello Guest it is March 29, 2024, 04:56:30 AM

Author Topic: BRAINS  (Read 2206 times)

0 Members and 1 Guest are viewing this topic.

BRAINS
« on: April 24, 2014, 03:55:50 AM »
Hi there, I have just purchased Gerry's screen 2010, and when doing the installation it tells you to go to the "OPERATOR.... BRAIN CONTROL... enable brains.. BUT allas and behold there are  NO   BRAINS in the BOX to enable, can some one please help me to put some Brains into the Brain Box..    :P ???

Thanks in advance

Nick 

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: BRAINS
« Reply #1 on: April 24, 2014, 08:22:02 AM »
Sounds like you installed the screenset in the wrong place.
The brains should be in your \Mach3\Brains\folder
If you look in your mach3 installation folder, do you have a \Mach3\macros\2010\ folder? I'm guessing that you don't.

You're better off emailing me directly for help, as I may not always see messages posted here.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: BRAINS
« Reply #2 on: April 24, 2014, 11:17:42 PM »
Thanks Ger21, I have re-installed it and also up graded Mach3 to the latest version and all is working well so Far!!!. Now to set up the table co-ordinates ans soft limits, should be fun

Regards
Nick