Hello, I would like to dry-test some g-code that I have with mach 3 on a computer that is not plugged with a cnc. Is it possible and if yes, how?

Thank you very much!

David

Just open Mach, load the code and press Start.
Toy will however have to first change the active state of the E-Stop output so Mach will come out of Reset.
To do that you go to Config menyu, Ports and Pins, Inputs and scroll down to E-Stop and change the active state. Once you have done that then you will be able to take Mach out of Reset.
Hood

Thanks awesome!

It was very kind to answer quickly!

I hope I will be able to help other people with time!