Hello Guest it is October 26, 2021, 10:59:38 AM

Author Topic: Mach 3 Dry test  (Read 1962 times)

0 Members and 1 Guest are viewing this topic.

Mach 3 Dry test
« on: April 12, 2014, 10:06:52 PM »
Hello, I would like to dry-test some g-code that I have with mach 3 on a computer that is not plugged with a cnc. Is it possible and if yes, how?

Thank you very much!


Offline Hood

  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: Mach 3 Dry test
« Reply #1 on: April 13, 2014, 04:27:56 AM »
Just open Mach, load the code and press Start.
Toy will however have to first change the active state of the E-Stop output so Mach will come out of Reset.
To do that you go to Config menyu, Ports and Pins, Inputs and scroll down to E-Stop and change the active state. Once you have done that then you will be able to take Mach out of Reset.
Re: Mach 3 Dry test
« Reply #2 on: April 14, 2014, 08:18:17 PM »
Thanks awesome!

It was very kind to answer quickly!

I hope I will be able to help other people with time!