Hello Guest it is April 23, 2024, 10:03:39 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Retrofit Bocsh cc100  (Read 2681 times)

0 Members and 1 Guest are viewing this topic.

Offline comet

*
  • 337 337
    • View Profile
Retrofit Bocsh cc100
« on: March 12, 2007, 01:49:45 PM »
Hi,
   hope someone can help!
Is it possible to retrofit a router which is controlled with a Bosch cc100,with mach3
  The router is a 1986 wadkin UX type.
I believe it is equipped with perm mag servo motors.
  Any help/info would be much appreciated.
   Tony
Logged

Offline Brian Barker

*
  • *
  • 3,859 3,859
    • View Profile
Re: Retrofit Bocsh cc100
« Reply #1 on: March 12, 2007, 11:41:37 PM »
You are going to need the specs off the motors and once you have that you can look at servo drives. Look at the drives from CNC Teknix drives (I think they will be about the right size also see if you can use GeckoDrives)
Logged
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Pages: 1   Go Up
« previous next »