Hello Guest it is December 07, 2019, 11:09:02 AM

Author Topic: Mach 3 only loads half of the gcode  (Read 13679 times)

0 Members and 1 Guest are viewing this topic.

Re: Mach 3 only loads half of the gcode
« Reply #10 on: November 16, 2016, 09:39:25 AM »
I to have the same problem with my system. It only cut 500 lines even though it is licensed, I bought the license from the mach3 website. It comes up as licensed with my name
but still only 500 lines. I can disable the port and it sets all lines but won't cut any thing. Enable and it runs as demo but it is licensed.

Offline rcaffin

*
  •  1,007 1,007
    • View Profile
Re: Mach 3 only loads half of the gcode
« Reply #11 on: December 03, 2016, 10:53:24 PM »
This is a licencing issue. Contact Artsoft.
Cheers
Roger

Offline Tweakie.CNC

*
  • *
  •  8,016 8,016
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Mach 3 only loads half of the gcode
« Reply #12 on: December 04, 2016, 01:34:11 AM »
This .pdf gives an explanation regarding license installation;  ftp://anonymous:guest@ftp.machsupport.com/Extra%20Information/Mach3%20License%20install%201.pdf

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline rcaffin

*
  •  1,007 1,007
    • View Profile
Re: Mach 3 only loads half of the gcode
« Reply #13 on: December 04, 2016, 01:48:03 AM »
Hey Tweakie - that URL does not work for me.
Cheers
Roger

Offline Tweakie.CNC

*
  • *
  •  8,016 8,016
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Mach 3 only loads half of the gcode
« Reply #14 on: December 04, 2016, 03:41:27 AM »
Hi Roger,

I was in two minds about posting it as ftp:// links work for some and not for others.  :'(

(You can get the .pdf by going to the .ftp downloads area http://www.machsupport.com/software/downloads-updates/ , it is listed under Extra Information).

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline rcaffin

*
  •  1,007 1,007
    • View Profile
Re: Mach 3 only loads half of the gcode
« Reply #15 on: December 04, 2016, 03:53:28 AM »
The wheels sit there spinning, and spinning ...
But they never get there???
WXP SP3

Cheers
Roger

Offline Tweakie.CNC

*
  • *
  •  8,016 8,016
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Mach 3 only loads half of the gcode
« Reply #16 on: December 06, 2016, 03:54:27 AM »
The wheels sit there spinning, and spinning ...
But they never get there???
WXP SP3

Cheers
Roger


You could perhaps try resetting your DNS Server.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline rcaffin

*
  •  1,007 1,007
    • View Profile
Re: Mach 3 only loads half of the gcode
« Reply #17 on: December 06, 2016, 04:29:37 AM »
My system must be locking out whatever response the FTP side of things is getting. No idea why.
Maybe an adblocker and a cookie filter?
Cheers
Roger