Hello Guest it is March 29, 2024, 01:38:21 AM

Author Topic: Cam Bam Post Processor to Mach3  (Read 2138 times)

0 Members and 1 Guest are viewing this topic.

Cam Bam Post Processor to Mach3
« on: March 07, 2014, 02:19:50 PM »
When using cambam to mach 3, how important is it to set the post processor in the machining file?

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Cam Bam Post Processor to Mach3
« Reply #1 on: March 07, 2014, 06:03:41 PM »
The post processor is used by Cambam to adjust the generated code so it is appropriate for Mach use and not some other controller.

RICH