Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Evanrigs on March 07, 2014, 02:19:50 PM

Title: Cam Bam Post Processor to Mach3
Post by: Evanrigs on March 07, 2014, 02:19:50 PM
When using cambam to mach 3, how important is it to set the post processor in the machining file?
Title: Re: Cam Bam Post Processor to Mach3
Post by: RICH on March 07, 2014, 06:03:41 PM
The post processor is used by Cambam to adjust the generated code so it is appropriate for Mach use and not some other controller.

RICH