Hello Guest it is March 28, 2024, 07:52:11 PM

Author Topic: Status Line Min Z  (Read 2694 times)

0 Members and 1 Guest are viewing this topic.

Offline kolias

*
  •  1,154 1,154
    • View Profile
Status Line Min Z
« on: January 19, 2014, 11:11:38 AM »
About to get my 1st try to cut a piece and the status line on Mach3 says "Min-Z-.125"

Is this a warning that something is wrong or it is a statement to tell me that my depth is -0.125" ?

My max depth is 0.125" and I'm cutting a piece of MDF
Nicolas

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Status Line Min Z
« Reply #1 on: January 19, 2014, 11:41:49 AM »
It's a comment in your g-code from your CAM program.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline kolias

*
  •  1,154 1,154
    • View Profile
Re: Status Line Min Z
« Reply #2 on: January 19, 2014, 03:55:44 PM »
I found the line of this comment Gerry, Thanks
Nicolas