Hello,
We are having issues regarding our CNC machine. During a program, multiple things could happen:
- We could run the same program 14 times in a row and nothing go wrong. We could run it 3 times in a row and nothing go wrong.
- We could run the same program 1 time and the Z location is not correct, and the piece isn't cut all the way through or too deep.
- We could run the same program, and it ignores any Y coordinates and just keeps cutting along X.
- We could run the same program, and it ignores any X coordinates and just keeps cutting along Y.
Usual fix:
- Restart machine, computer, reset everything. Sometimes it works, sometimes it does for a while, then problem persists.
- Check connections, cat-5 cable, etc.
- I have reinstalled Mach3 to the most up to date version.
We do have a Super PID for speed control, but this shouldn't affect the x,y, and z.
Thank you,
Austin