Hello Guest it is March 29, 2024, 06:14:30 AM

Author Topic: Display value of Gcode variable on a DRO  (Read 2368 times)

0 Members and 1 Guest are viewing this topic.

Display value of Gcode variable on a DRO
« on: December 11, 2013, 11:41:34 AM »
Is there a standard code to put in the screen designer DRO to display a variable value that will be set via gcode #var?
Re: Display value of Gcode variable on a DRO
« Reply #1 on: December 11, 2013, 11:53:34 AM »
Not sure if there is an automatic way to do that, but you could always do it with a macropump.

Regards,
Ray L.
Regards,
Ray L.

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Display value of Gcode variable on a DRO
« Reply #2 on: December 11, 2013, 05:33:13 PM »
There ARE some Dros that are cross linked to Vars I will try to look it up for you.

Rays way works for sure.

(;-) TP

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Display value of Gcode variable on a DRO
« Reply #3 on: December 11, 2013, 05:49:44 PM »
Here is the scoop, enter a value into either side and you will see the value on the opposite side of the cross link.

#Vars  15001 - 15255

are cross linked with

User Dros 1001 - 1255

(;-)TP