Hi another noob here, Just want some advice on my settings i useing nema 23 300 Oz now i made a booboo as instead of doing a reduction on me plasma table iv gone direct drive mod 1.5 rack with a 15 tooth gear. I used the auto calibration in mach3 my driver is set to 1/8th and ive ended up with 22.5 steps iv set the velocity at 6000 and acceleration at 1000 x and y axis runs ok but wasent sure these setting would do any damage to my drivers or steppers.
i will be doing a gear reduction before the mod 1.5 rack in the future but just want to get things running for now any advice would be great thx