Hello Guest it is March 19, 2024, 12:44:39 AM

Author Topic: Help!  (Read 2247 times)

0 Members and 1 Guest are viewing this topic.

Help!
« on: November 09, 2013, 12:09:40 PM »
I feel left out!
Mach3 is working perfectly!
My mill and controller have had a variety of issues but even when I accidentally use the default BobCad 4 Axis Post I still get entirely useable code that makes nice parts, is there something I can do to remedy this lamentable situation?
TIA,
Nick  ;)

Offline Tweakie.CNC

*
  • *
  •  9,194 9,194
  • Super Kitty
    • View Profile
Re: Help!
« Reply #1 on: November 09, 2013, 12:24:39 PM »
 ;D ;D ;D

Tweakie.
PEACE

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Help!
« Reply #2 on: November 09, 2013, 06:38:52 PM »
Nick,
Sometimes the machine and software just waite a long time, they have infinite patience, then out the blue they may quitely show somethng which is representative of  words from a movie ......" Tell me, do you feel lucky, just can't seem to remember how many times I let you run with no problems, now then, it may have been 10 times or ten months of running, just can't seem to recollect, so tell me Nick, feel lucky?"   ;) :) :) :) :)

RICH
Re: Help!
« Reply #3 on: November 09, 2013, 06:52:07 PM »
Wise words Rich,
I was touching wood and stroking a black cat the right way as I made my post ;-)
I have a later PC and an additional parallel port to implement which may leave me feeling a little more loved?
:D
Nick