Hey guy's I'm using this Macro to find the top of the Tool pallet that I'm using with a ATC.
But it always say's "Zero plate grounded Or faulty". What's funny is the Macro works, it just that.
I know the Zero plate is working properly because when I use my other Z zero button on the program run screen in
Mach 3 it work's fine. Please look over the Macro to see if something is out of place.
Also at the end of a G-code run I have added a M06 T00 G49 to replace the Tool holder in the Pallet.
Well it replaces it, then it picks it back up for some odd reason and goes to zero. Any help would be greatly appreciated
on this problem. I've attached the M500 Tool pallet Macro and the START m1ls Macro to look at. Thanks
Rich