Hello Guest it is November 21, 2019, 11:36:53 PM

Author Topic: roughing job away from workpiece, finishing job is fine  (Read 7025 times)

0 Members and 1 Guest are viewing this topic.

roughing job away from workpiece, finishing job is fine
« on: September 07, 2013, 12:23:49 PM »
Hello,

I have a problem. The roughing job cuts far away from the workpiece. The finishing job cuts right.

In lazycam everything looks fine, but after loading the file in Mach3mill it looks strange.

The G-Code is wrong, so it must be a problem with lazyturn...

Please help me.  :)

Re: roughing job away from workpiece, finishing job is fine
« Reply #1 on: November 15, 2013, 01:05:17 AM »
hi,
I encountered the same problem. did get the solution ? ???

Offline RICH

*
  • *
  •  7,371 7,371
    • View Profile
Re: roughing job away from workpiece, finishing job is fine
« Reply #2 on: November 15, 2013, 05:01:36 AM »
MOHAMEDHELMI,
Have you read the Lazyturn Manual?

RICH
Re: roughing job away from workpiece, finishing job is fine
« Reply #3 on: November 15, 2013, 04:37:10 PM »
yes I finish reading it
but may be I messd some details .