Hello Guest it is December 05, 2021, 01:02:26 AM

Author Topic: Installing new motors  (Read 1688 times)

0 Members and 1 Guest are viewing this topic.

Installing new motors
« on: August 19, 2013, 06:50:01 PM »
I presently have 3 nema 23, 130 oz motors that I will be replacing with nema 23, 425oz. My question is do I need to re-calibrate my new motors, I'm running Mach3 with hobbycnc pro board.?
Any help in calibration values to input would be appreciated as a starting point  ;)

Offline ger21

  • *
  •  6,293 6,293
    • View Profile
    • The CNC Woodworker
Re: Installing new motors
« Reply #1 on: August 19, 2013, 09:54:17 PM »
You should just need to change the velocity and acceleration settings. If you don't change those, then you won't see any difference with the new motors.

2010 Screenset

JointCAM Dovetail and Box Joint software