SS siganl help

Pages: 1 Go Down

0 Members and 1 Guest are viewing this topic.

« on: July 31, 2013, 08:30:22 AM »

why M3 home signal is on？？？The board No wiring ，But in the mach inside, M3 home signal is on。。。。

Logged

Don't like spittoon silence, want, study great nightstool can spatter get up owner's ripples

« Reply #1 on: July 31, 2013, 08:42:00 AM »

If there is no wiring it should not be enabled.

Brett

Logged

If you could see the things I have in my head, you would be laughing too.

My guard dog is not what you need to worry about!

« Reply #2 on: July 31, 2013, 09:27:26 AM »

Sorry, this is the English forum so I Deleted your last 2 post.

Brett

Logged

If you could see the things I have in my head, you would be laughing too.

My guard dog is not what you need to worry about!

« Reply #3 on: July 31, 2013, 10:05:39 AM »

If there is no wiring it should not be enabled.

Brett

My SS circuit board connected to the usb data cable only。。。。

Logged

Don't like spittoon silence, want, study great nightstool can spatter get up owner's ripples

« Reply #4 on: July 31, 2013, 12:51:58 PM »

OK, so either get the wires for you home and limit switches hooked up or disable them...... those pins will be floating until you do this.

Brett

Logged

If you could see the things I have in my head, you would be laughing too.

My guard dog is not what you need to worry about!

Pages: 1 Go Up