Hello Guest it is September 26, 2023, 06:12:46 AM

Author Topic: Macro for finding egde alignment  (Read 1715 times)

0 Members and 1 Guest are viewing this topic.

Macro for finding egde alignment
« on: July 21, 2013, 11:06:17 AM »
Hey guy's looking for a macro to  align material in the Y direction and the X direction.
Like doing a probe on the -Y then retract and go to the +Y direction and give a distance
 the part is out of alignment. Hope this makes sense. I found this picture but can't seem to get
a hold of the owner of it. Crap after looking at it again I need alot of macros.
Or a similar screen that can be added to Mach 3.  Thanks Richard
« Last Edit: July 21, 2013, 11:10:03 AM by hacker77 »