Hello Guest it is March 28, 2024, 05:09:42 PM

Author Topic: Shuttle Pro 2 wheels won't work  (Read 5136 times)

0 Members and 1 Guest are viewing this topic.

Shuttle Pro 2 wheels won't work
« on: February 18, 2007, 04:33:58 AM »
Hello,

I've installed a Shuttle Pro 2, the shuttlepro.dll from the ftp site (version 1.0a) in the plugin directory, checked the box in config plugins and configured a few buttons. The buttons works fine, but the inner and outer wheels do nothing! Do i miss something? b.t.w. there is also a ShuttlePrp.m3p file. Can i load that file also?

Cheers, Andre.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Shuttle Pro 2 wheels won't work
« Reply #1 on: February 18, 2007, 09:40:04 AM »
Download the ShuttlePro.m3p from the plugins page under the downloads link. After you download it, double click on it to install it. I think the FTP one is a much older version.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Shuttle Pro 2 wheels won't work
« Reply #2 on: February 18, 2007, 03:41:47 PM »
Thanks, that works!

Cheers, Andre.
Re: Shuttle Pro 2 wheels won't work
« Reply #3 on: April 22, 2007, 04:48:10 PM »
I have this same problem. Shuttle Pro 2 buttons work fine, but the wheels don't. I tried to find the response on this prior reported problem, but I cannot seem to access the older posts. Any solutions to the unworking wheels.

Thanks.

BRH
Re: Shuttle Pro 2 wheels won't work
« Reply #4 on: April 22, 2007, 11:08:54 PM »
First off don't install the stock software that came with the Shuttle Pro. It interferes with the Mach3 driver. Then download the Mach3 plug-in and install it. Here http://www.artsoftcontrols.com/PlugIns/ShuttlePro.m3p. The hardest part for me was locating the configuration page. It's located under Config... Config Plugins... then pick the yellow highlighted "CONFIG". Once I did these 3 steps mine works great. Sell the center wheel is not a great revolver wheel but the jog ring works great. I have attached a photo of my Shuttle Pro configuration.

Hope this helps.
Re: Shuttle Pro 2 wheels won't work
« Reply #5 on: July 21, 2007, 12:13:43 AM »
Hi Skip,

Would you mind telling me which buttons are used and what for please. I have got the shuttlepro2 installed okay but I really like the look of your buttons and would not mind putting them on mine :).

I need to know which functions are configured and to what keys  ;D

Cheers,
« Last Edit: July 21, 2007, 12:18:14 AM by crocky »
Bob