Hello Guest it is March 28, 2024, 04:52:37 PM

Author Topic: Problem with Run From Here in R3.043.066  (Read 7211 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Problem with Run From Here in R3.043.066
« Reply #10 on: May 09, 2013, 05:00:56 PM »
I am not sure, its unlikely but you never know. Having said that if it works fine in an older version then I dont think the screenset is the issue.
Hood

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Problem with Run From Here in R3.043.066
« Reply #11 on: May 09, 2013, 09:39:59 PM »
The screenset should really have no effect on the way Mach3 runs at all, except when the macros that are supplied with it are running. The 2010 Screenset does Run From Here exactly the same as the standard screenset, with a button calling the system function "Set Next Line".
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Problem with Run From Here in R3.043.066
« Reply #12 on: May 10, 2013, 01:22:20 AM »
Gerry,

Thanks for your comments also.  Where is the Set Next Line function call located?  If you know.

Thank you.

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Problem with Run From Here in R3.043.066
« Reply #13 on: May 10, 2013, 07:00:55 AM »
It's an internal function that you assign in the Screen editor. It's the "Run from Here" command, but it's called "Set Next Line in the screen designer.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Problem with Run From Here in R3.043.066
« Reply #14 on: May 10, 2013, 07:07:29 AM »
How do you access it?  I would like to compare what is in 66 and in my older version.

Thanks

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Problem with Run From Here in R3.043.066
« Reply #15 on: May 10, 2013, 07:19:08 AM »
Open the screenset(s) in Screen4 and check what the button is assigned to do. either right click or double click the button to bring up it's properties.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Problem with Run From Here in R3.043.066
« Reply #16 on: May 10, 2013, 08:08:18 AM »
Gerry,

Ok, that gives me the properties but I want to look at the code.  How do I find that?

Thanks

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Problem with Run From Here in R3.043.066
« Reply #17 on: May 10, 2013, 08:30:06 AM »
There is no code, it's a built in function that can't be modified.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html