Hello Guest it is March 29, 2023, 12:51:44 PM

Author Topic: Using Mach3 with my Syil X3 Mill - Making a Cross Shaped Part  (Read 3449 times)

0 Members and 1 Guest are viewing this topic.

Hi All,

I thought I show you how I make part of a Semirigid Coaxial Cable Bender.  The bender is used to bend RG402 Cable in the RF Microwave industry.

I published a video on YouTube last week explaining to customers how to use the bender.  Have a look here if you are interested.


Here is my Syil X3 cutting the profile of the cross shaped part.