Machsupport Forum

General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: chrisjh on April 24, 2013, 11:39:03 PM

Title: Using Mach3 with my Syil X3 Mill - Making a Cross Shaped Part
Post by: chrisjh on April 24, 2013, 11:39:03 PM

Hi All,

I thought I show you how I make part of a Semirigid Coaxial Cable Bender.  The bender is used to bend RG402 Cable in the RF Microwave industry.

I published a video on YouTube last week explaining to customers how to use the bender.  Have a look here if you are interested.

http://www.youtube.com/watch?v=dY924WT9_eY

Here is my Syil X3 cutting the profile of the cross shaped part.

http://youtu.be/lIDxtuhaj6Y

Regards

Chrisjh