Hello Guest it is March 29, 2024, 11:33:59 AM

Author Topic: Cant jog of the limit switch  (Read 8094 times)

0 Members and 1 Guest are viewing this topic.

Cant jog of the limit switch
« on: April 18, 2013, 03:51:45 PM »
Finally!
I got my inductive proximity switches working correctly.
X Y & Z all go to the home position when the Home Key is pressed. Hooray!

Now the problem,

If I set the x--- to be the same as my X home. Now when triggered I cant Jog away from it to a safe position. ??
Message is correct saying 'Xlimit switch triggered' but pressing 'Reset' has no effect

Have I still got it wrong ?

Thanks

George
One step at a time!

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Cant jog of the limit switch
« Reply #1 on: April 18, 2013, 04:27:19 PM »
George, go to the settings page and enable the autolimits override.  Top left.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Cant jog of the limit switch
« Reply #2 on: April 19, 2013, 04:24:36 PM »
Many thanks Bret, that's where it was hiding :-)

All working fine now.

Regards

George
One step at a time!

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Cant jog of the limit switch
« Reply #3 on: April 19, 2013, 08:16:22 PM »
 :)

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!