Hello Guest it is September 25, 2023, 11:34:45 AM

Author Topic: M Codes  (Read 2282 times)

0 Members and 1 Guest are viewing this topic.

M Codes
« on: August 06, 2012, 03:35:04 PM »
I am using plasma for the first time.  I have to fire the torch manually in the Mach screen.  I expected it to toggle to the start point and fire automatically when it hit the start point of the design.

Instead I have to fire it and it drags over to the start point and starts it's code run.

Does anyone know the M Codes I need to generate to fire at the start point? Is there something else I might be missing?

Am I right or wrong on it firing at the start point of the design on it's own?

Only one way to Get-er-Done......Do-er-Right!
Re: M Codes
« Reply #1 on: April 15, 2013, 08:51:47 PM »
I am having the same problem. Did you ever find a solution?

Offline Chaoticone

  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: M Codes
« Reply #2 on: April 16, 2013, 12:03:01 AM »
Sorry I missed this, you will find a lot of information by going to the link below and doing a search for THC.


;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!