Hello Guest it is October 22, 2019, 08:26:32 AM

Author Topic: Limit Switch Question  (Read 1711 times)

0 Members and 1 Guest are viewing this topic.

Limit Switch Question
« on: April 08, 2013, 08:28:50 PM »
I have finally got my limit switches installed and working on my X3 using honeywell switches attached to a CNC4pc c11g board. They all seem to work fine, but my question is...

When a limit is triggered, shouldn't I be able to hit reset or something, and continue jogging off the switch? Currently it I trigger a limit, I have to disabled the limit switch before I can jog off the switch.

Offline Chaoticone

*
  • *
  •  5,607 5,607
  • Precision Chaos
    • View Profile
Re: Limit Switch Question
« Reply #1 on: April 08, 2013, 09:19:03 PM »
Look on the settings page and enable auto limit override.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Limit Switch Question
« Reply #2 on: April 09, 2013, 06:57:00 PM »
Thanks, I look for that.