Hello Guest it is June 26, 2019, 07:11:52 PM

Author Topic: mach3 threading speed variations  (Read 1993 times)

0 Members and 1 Guest are viewing this topic.

mach3 threading speed variations
« on: March 26, 2013, 06:07:11 PM »
i want to know if the new versions of mach3 that include the speed control of the spindle
still sync the Z axis speed to the spindle speed when threading..
with version 6.23 it seems that if the spindle speed decreases the z axis speed stays the same....

Offline Hood

*
  •  25,847 25,847
  • Carnoustie, Scotland
    • View Profile
Re: mach3 threading speed variations
« Reply #1 on: March 27, 2013, 08:14:33 AM »
You say "version 6.23" can you expand a little on that as it sounds unfamiliar to me.
Hood
Re: mach3 threading speed variations
« Reply #2 on: March 27, 2013, 01:26:15 PM »
Sorry i meant version 2.63... typo error...sorry

Offline Hood

*
  •  25,847 25,847
  • Carnoustie, Scotland
    • View Profile
Re: mach3 threading speed variations
« Reply #3 on: March 27, 2013, 02:55:34 PM »
2.63 is very old, lots of changes have been done to threading in the parallel port driver since then. If I recall it was about 043.036 or so that there was a big change.
Hood