Hello Guest it is July 08, 2020, 01:36:40 AM

Author Topic: mach 3 froze  (Read 3610 times)

0 Members and 1 Guest are viewing this topic.

Offline Chaoticone

*
  • *
  •  5,629 5,629
  • Precision Chaos
    • View Profile
Re: mach 3 froze
« Reply #10 on: March 20, 2013, 04:44:04 PM »
Quote
thank you,  Chaoticone, the lead is .5 " per rev ,it seems like that would be a 2 pitch , also the spread sheet has a default  value of 10 in the micro stepping window, i am not familiar with that value. shouldn't it be something like 1/8 or 1/4? thank you very much richard .

Richard, if your on 1/8 microstepping now your steps per will be 32,000 now, not 40,000.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!