Hello Guest it is November 16, 2019, 06:42:12 PM

Author Topic: Backlash comp and Pulse Engine  (Read 3065 times)

0 Members and 1 Guest are viewing this topic.

Backlash comp and Pulse Engine
« on: March 17, 2013, 02:28:44 PM »
Hi,
Does the Pulse Engine support Backlash compensation?

I've tried all the usual suggestions - 10mm comp, 10 second Shuttle wheel, 10% to see if it obviously works but nothing. As well as the 50/50/50..

Lehane

Offline txpto

*
  •  28 28
    • View Profile
(No subject)
« Reply #1 on: December 10, 2013, 04:59:30 PM »
Mach3 support backlash compensation. Pokeys "is only" a motion hardware....is software that support this issue.

Enviado desde mi GT-N7100 mediante Tapatalk

Offline NeoTO

*
  •  504 504
    • View Profile
    • PoLabs
Re: Backlash comp and Pulse Engine
« Reply #2 on: December 18, 2013, 12:03:09 AM »
Backlash compensation is not available when jogging. When executing the job, the PoKeys does exactly what Mach3 tells it to do.

Regards,
MatevΕΎ
www.poscope.com home of PoKeys USB HID, IO, USB, Ethernet controler and PoScope USB PC oscilloscope