Machsupport Forum

Third party software and hardware support forums. => PoKeys => Topic started by: g8kmh on March 17, 2013, 02:28:44 PM

Title: Backlash comp and Pulse Engine
Post by: g8kmh on March 17, 2013, 02:28:44 PM

Hi,
Does the Pulse Engine support Backlash compensation?

I've tried all the usual suggestions - 10mm comp, 10 second Shuttle wheel, 10% to see if it obviously works but nothing. As well as the 50/50/50..

Lehane

Title:
Post by: txpto on December 10, 2013, 04:59:30 PM

Mach3 support backlash compensation. Pokeys "is only" a motion hardware....is software that support this issue.

Enviado desde mi GT-N7100 mediante Tapatalk

Title: Re: Backlash comp and Pulse Engine
Post by: NeoTO on December 18, 2013, 12:03:09 AM

Backlash compensation is not available when jogging. When executing the job, the PoKeys does exactly what Mach3 tells it to do.

Regards,
Matevž