can someone test this please.
i can hear inch. when it says Millimeters, it sounds
like it's saying MillMillimeters. there're two voices.
no other sound using sound card.
Thanks
If GetUserLED(1012) Then
SetUserDRO(1010 , GetUserDRO(1010) / 25.4)
Message( "Inch" )
SetUserLED(1012,0)
SetTicker ( Ticker0 , Inch )
Speak " Inches "
Else
SetUserDRO(1010 , GetUserDRO(1010) * 25.4)
Message( "MM" )
SetUserLED(1012,1)
SetTicker ( Ticker250 , MM )
Speak " Millimeters "
End If
even if i add Speak " This is Millimeters "
when i gets to Millimeters same sound.