Hello Guest it is March 28, 2024, 08:45:43 PM

Author Topic: m06 end  (Read 2144 times)

0 Members and 1 Guest are viewing this topic.

Offline comet

*
  •  336 336
    • View Profile
m06 end
« on: February 13, 2013, 04:12:32 PM »
what does m06 end do? is this where i should put the g43? i have an atc on my machine

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: m06 end
« Reply #1 on: February 13, 2013, 07:38:58 PM »
M6End is not used with an ATC.
When Mach3 is configured for M6 to "Stop Spindle, Wait for Cycle Start", M6Start runs when the M6 is called, and M6End runs after Cycle Start is pushed.

When Mach3 is configured for ATC, then only M6Start runs.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html