Hello Guest it is March 28, 2024, 08:58:11 AM

Author Topic: Need graphics help  (Read 2320 times)

0 Members and 1 Guest are viewing this topic.

Need graphics help
« on: February 03, 2013, 03:12:31 PM »
I have a small machine running Mach 3 that I would like to use to engrave a logo .005" deep in aluminum. The problem I have is that the artwork is in .jpeg format and I need to convert it to .dxf. For all of my searching out there, I can't find a program that will accomplish this - there MUST be a way to do this. Any help or guidance will be most appreciated.

Thanks.

Bill

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Need graphics help
« Reply #1 on: February 03, 2013, 05:05:49 PM »
I would have a look at one of the packages from Vectric.

http://www.vectric.com/products/vcarve-pro.htm

http://www.vectric.com/

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Need graphics help
« Reply #2 on: February 03, 2013, 05:58:23 PM »
Thanks Brett - that looks like it'll do the job.

Bill