Hello Guest it is December 11, 2019, 05:36:20 AM

Author Topic: Running Mach3 on USB  (Read 1641 times)

0 Members and 1 Guest are viewing this topic.

Running Mach3 on USB
« on: January 27, 2013, 08:57:12 PM »
Newby question.

Anyone running Running Mach3 on USB converter.
Any advise all help welcome.


Thanks in advance.

Kevin

Online Tweakie.CNC

*
  • *
  •  8,021 8,021
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Running Mach3 on USB
« Reply #1 on: January 28, 2013, 01:54:37 AM »
Hi Kevin,

Mach3 will not run with a 'USB Converter' as such.

For USB operation you would need an external 'Motion Controller' such as one of those shown on this page http://www.machsupport.com/plugins.php

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.