Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Ksheren on January 27, 2013, 08:57:12 PM

Title: Running Mach3 on USB
Post by: Ksheren on January 27, 2013, 08:57:12 PM

Newby question.

Anyone running Running Mach3 on USB converter.
Any advise all help welcome.


Thanks in advance.

Kevin

Title: Re: Running Mach3 on USB
Post by: Tweakie.CNC on January 28, 2013, 01:54:37 AM

Hi Kevin,

Mach3 will not run with a 'USB Converter' as such.

For USB operation you would need an external 'Motion Controller' such as one of those shown on this page http://www.machsupport.com/plugins.php

Tweakie.