Hello Guest it is May 17, 2021, 09:41:47 AM

Author Topic: switching from Plasma to Mill profile  (Read 1569 times)

0 Members and 1 Guest are viewing this topic.

switching from Plasma to Mill profile
« on: December 27, 2012, 12:15:54 PM »
Hi. This is my first post to this forum:
 I have been using the Mach 3 plasma profile. My CNC was originally set up for  a plasma cutter, but I have fitted it with a router instead. I have been using it with the plasma profile and it still works fine, but I would like to configure it to work with the mill profile. I have downloaded the mill profile but nothing works with it. Do I just need to copy all of the configurations that are set on the plasma profile, or is there something else I need to do (re-licensing, etc)?  Thanks

Offline Hood

  •  25,838 25,838
  • Carnoustie, Scotland
    • View Profile
Re: switching from Plasma to Mill profile
« Reply #1 on: December 27, 2012, 01:41:27 PM »
Copying your settings would suffice but also just loading the mill screenset should be all you need to do.