Hello Guest it is July 20, 2019, 08:14:32 AM

Author Topic: Third Annual CNC-Workshop ( June 11-17, 2007 ) Galesburg, Illinois, USA  (Read 9275 times)

0 Members and 1 Guest are viewing this topic.

ynneb

*
The Third Annual CNC-Workshop will be happening on June 11-17, 2007 in Galesburg, Illinois, USA
http://www.cnc-workshop.com/


Meet Art, Brian, and John there.
Learn some new stuff, network with others...............

The list of speakers is as follows..........

Artsoft - MACH Series CNC Control Software - Art Fenerty, Brian Barker, John Prentice

Flashcut - Flashcut CNC Control Systems - Ron Worth

IMService - Software and CNC Systems - Fred Smith

Rutex LLC - Motor Drivers and related products - Tom Eldredge

EMC - CNC Control Software - Ray Henry & The EMC Crew - EMC Code Development Sessions will be held

PMDX - Practical Micro Design - Demonstrating Some New Products - Steve Stallings

Bob Campbell Designs - Demonstrating a range of products - Bob Campbell

Computers in the Shop - HOME SHOP MACHINIST columns and projects - Roland Friestad, Mark Godsil

Should be a lot of fun. Don't miss out, enroll now.


« Last Edit: January 29, 2007, 07:45:29 AM by ynneb »
Re: Third Annual CNC-Workshop ( June 11-17, 2007 ) Galesburg, Illinois, USA
« Reply #1 on: January 29, 2007, 08:04:11 AM »
Benny I think you should come over ;)
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline rcrabb

*
  •  146 146
    • View Profile
Re: Third Annual CNC-Workshop ( June 11-17, 2007 ) Galesburg, Illinois, USA
« Reply #2 on: January 29, 2007, 06:35:41 PM »
Will there be a daily schedule? I would like to drive down for the weekend. Will it be worth a 5 hour drive? Any Mach or Newfangled giveaways? ;D
Ryan

ynneb

*
Re: Third Annual CNC-Workshop ( June 11-17, 2007 ) Galesburg, Illinois, USA
« Reply #3 on: January 29, 2007, 09:38:08 PM »
Brian, I would love to come over one time in the future.
Once we have the flash screen stuff finalized I will make the effort. That been said, Zealous ( Jason ) might be a better recruit to get over since he is the main man for this new development, and he is also more local. It might be interesting to see if he will hold a class on screen design.
Will you be holding a class on programming wizards?

Offline Graham Waterworth

*
  • *
  •  1,863 1,863
  • Yorkshire Dales, England
    • View Profile
Re: Third Annual CNC-Workshop ( June 11-17, 2007 ) Galesburg, Illinois, USA
« Reply #4 on: January 30, 2007, 04:02:30 AM »
I have got my name down, I am not going to miss this one.

Anybody else in the UK fancy a trip to the USA?

Graham.
Never give up, time will pass, the cloud will clear, the sun will shine once more.

ynneb

*
Re: Third Annual CNC-Workshop ( June 11-17, 2007 ) Galesburg, Illinois, USA
« Reply #5 on: February 02, 2007, 01:36:29 AM »
I have decided to come this year. There are a few personal variables that will determine if I actually make it over.

I  need to check with Roland if he will permit me to video many of the classes.
If so I will compile a DVD that we can sell at cost price to those who couldn't make it along.
Is the voltage over there 120 or 240Volts ? I need to know this in regard to recharging the video camera.

All of a sudden I am quite excited about this. Certain members have already offered to host me for a night at their place. It will be great to finally put a face to some of the characters here.
Re: Third Annual CNC-Workshop ( June 11-17, 2007 ) Galesburg, Illinois, USA
« Reply #6 on: February 02, 2007, 08:02:56 AM »
120VAC here for the little stuff :)

Benny if you need a place I think I can find my old tent  ;D
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline Graham Waterworth

*
  • *
  •  1,863 1,863
  • Yorkshire Dales, England
    • View Profile
Re: Third Annual CNC-Workshop ( June 11-17, 2007 ) Galesburg, Illinois, USA
« Reply #7 on: February 02, 2007, 12:38:36 PM »
Don't you just love there generosity  ;D

Graham.
Never give up, time will pass, the cloud will clear, the sun will shine once more.

ynneb

*
Re: Third Annual CNC-Workshop ( June 11-17, 2007 ) Galesburg, Illinois, USA
« Reply #8 on: February 02, 2007, 05:31:26 PM »
Don't you just love there generosity  ;D

and their woosey voltages. :p
Re: Third Annual CNC-Workshop ( June 11-17, 2007 ) Galesburg, Illinois, USA
« Reply #9 on: February 02, 2007, 06:29:43 PM »
I can run 220 out to the tent  ;D
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com