Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: ynneb on January 29, 2007, 07:31:26 AM
-
The Third Annual CNC-Workshop will be happening on June 11-17, 2007 in Galesburg, Illinois, USA
http://www.cnc-workshop.com/
Meet Art, Brian, and John there.
Learn some new stuff, network with others...............
The list of speakers is as follows..........
Artsoft - MACH Series CNC Control Software - Art Fenerty, Brian Barker, John Prentice
Flashcut - Flashcut CNC Control Systems - Ron Worth
IMService - Software and CNC Systems - Fred Smith
Rutex LLC - Motor Drivers and related products - Tom Eldredge
EMC - CNC Control Software - Ray Henry & The EMC Crew - EMC Code Development Sessions will be held
PMDX - Practical Micro Design - Demonstrating Some New Products - Steve Stallings
Bob Campbell Designs - Demonstrating a range of products - Bob Campbell
Computers in the Shop - HOME SHOP MACHINIST columns and projects - Roland Friestad, Mark Godsil
Should be a lot of fun. Don't miss out, enroll now.
-
Benny I think you should come over ;)
-
Will there be a daily schedule? I would like to drive down for the weekend. Will it be worth a 5 hour drive? Any Mach or Newfangled giveaways? ;D
-
Brian, I would love to come over one time in the future.
Once we have the flash screen stuff finalized I will make the effort. That been said, Zealous ( Jason ) might be a better recruit to get over since he is the main man for this new development, and he is also more local. It might be interesting to see if he will hold a class on screen design.
Will you be holding a class on programming wizards?
-
I have got my name down, I am not going to miss this one.
Anybody else in the UK fancy a trip to the USA?
Graham.
-
I have decided to come this year. There are a few personal variables that will determine if I actually make it over.
I need to check with Roland if he will permit me to video many of the classes.
If so I will compile a DVD that we can sell at cost price to those who couldn't make it along.
Is the voltage over there 120 or 240Volts ? I need to know this in regard to recharging the video camera.
All of a sudden I am quite excited about this. Certain members have already offered to host me for a night at their place. It will be great to finally put a face to some of the characters here.
-
120VAC here for the little stuff :)
Benny if you need a place I think I can find my old tent ;D
-
Don't you just love there generosity ;D
Graham.
-
Don't you just love there generosity ;D
and their woosey voltages. :p
-
I can run 220 out to the tent ;D
-
How much for the service fee ? Will I need to give you a security bond for the tent and power connection?
-
Will anybody at the workshop be demoing SprutCAM or Visual Mill? If so, is there a planned day for that? I'd like to attend but will be able to get away from work for only a day or two at most.
Mike
-
We (MachMotion) are planing to be there again this year! We will be coming in Thursday afternoon and leaving Saturday afternoon (wish we could be there longer but that is all we can do at this time). We will be showing off some of our CNC Controls, Drives, Motors, and a new breakout board.
-
Would anyone be interested in demonstrating my probe or camera, for compensation? You can see them in the bargain basement.
If so please pm me.
Arnie