Hello Guest it is December 08, 2021, 10:11:05 PM

Author Topic: Getting motors to run opposite direction  (Read 1910 times)

0 Members and 1 Guest are viewing this topic.

Getting motors to run opposite direction
« on: November 21, 2012, 05:48:43 PM »
I just replaced the computer I was using with Mach3 (and smooth stepper) and the motors now run the opposite direction than the used to. Is the an easy fix without re-wiring?
Jim

Offline ger21

*
  • *
  •  6,293 6,293
    • View Profile
    • The CNC Woodworker
Re: Getting motors to run opposite direction
« Reply #1 on: November 21, 2012, 05:55:30 PM »
Config >Homing/Limits and check the "Reverse" column.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Getting motors to run opposite direction
« Reply #2 on: March 12, 2013, 11:13:42 AM »
Genuis....To a newbie to CNC..such information is valuable. Many thanks