Hello Guest it is June 20, 2019, 04:33:31 AM

Author Topic: Milling machines using Mach3  (Read 1776 times)

0 Members and 1 Guest are viewing this topic.

Milling machines using Mach3
« on: October 02, 2012, 10:34:37 AM »
Hi,
 
Am developing an accessory that requires Mach3.  What other companies besides Tormach make a machine using Mach3?

TIA
Re: Milling machines using Mach3
« Reply #1 on: October 02, 2012, 12:09:56 PM »
Did some research - appears Taig, Syil, Seig, Novacon and Vektor (Haas) all use Mach 3 control.  Any others??

Thanks
Re: Milling machines using Mach3
« Reply #2 on: October 03, 2012, 01:37:03 AM »
Hi, most stand alone milling machines can be converted to run with Mach3, in my case I abandoned an old Denford processor on my Triac mill and fitted a BOB, a spindle drive card, and 3 stepper drives to allow Mach 3 to run my machine. It's very useful processor to update old style systems.