In Post 19 is the way to change from manual to CNC. Disable factory lock/ / It works a follows // enter>p0 is displayed>^ once p1 displayed, enter, p1-000 displayed. enter> 000001 is not but 000000 is. enter p1-000 is ESC 2 times as I read it 000001 & 000000 is the key to lock an unlock.
to change from manual to mach3 control as follows// enter>P0 is displayed, not p0-000 , , enter>P0-000 is displayed, , enter>000001 is displayed, not 000000.,,enter>P0-000 is displayed, , ^till p0-002 is displayed, , enter>000002 is displayed not 000000,, , enter>p0002 is displayed ESC 2 times. (as you can see, it skips steps).
Also I coded in x5.00 m3 s200. On the screen it was moving but the machine was not. Also I still had hand VFD control for speed