Greetings folks - First CNC adventure starting with the new Taig. I even got latest version of Mach3 installed. Using XP! At this time, Would just like to know how to configure the right screen settings in Mach3 so that I can test & Jog/ RUN each axis individually. This is the outstanding Taig Microproto 2000 mill with the stepper system. 4 axis system. If this makes any difference I have the parallel port connected to the PC. X Y & Z axis are connected to the Driver Box that is not turn on when system is started. A axis port is not connected.
I have read the instructions different times but being that I have no previous experience with the jargon, settings, configurations, etc. I've lost my way. So I decided to present this to the Forum, which is also new to me, to see if there may be somebody who is willing to take the time to explain how all this is to come about or just tell me where to go.
Appreciate your patience & understanding concerning this matter. Looking forward to what input, suggestions, & assistance that the Forum has to offer this senior citizen.