Hello
I have been working with Onecnc for a while now for a local machine shop. The machines they have are Haas's of different types.
I made a small DIY mill some time ago and have been using Mach3 to run some programs I have written and the wizards have generated.
I'm in the process of making a bigger DIY mill so I can machine slightly bigger parts but with better finish and accuracy as the stepper motors are direct drive now not belt drive as before.
So to my problem.
When I use Onecnc to generate the G-Code Mach3 shows a line error as the pic shows.
I have used the Mach3 code generator within Onecnc but no go can anyone help with this issue.
Thanks in advance.
Tack1000