Hello Guest it is August 10, 2020, 06:21:16 PM

Author Topic: mach3 running Techno CNC LC series 4896  (Read 2595 times)

0 Members and 1 Guest are viewing this topic.

mach3 running Techno CNC LC series 4896
« on: May 18, 2012, 10:48:04 AM »
Can mach3 run a Techno CNC LC series 4896? If so what is required to use it?

Offline Chaoticone

*
  • *
  •  5,628 5,628
  • Precision Chaos
    • View Profile
Re: mach3 running Techno CNC LC series 4896
« Reply #1 on: May 18, 2012, 07:33:18 PM »
Hello CSS, welcome to the forum.

Mach can run it but what all you will need to do so is anyones guess.  Help us out by telling us what you have now. If you have any documents or links you can post that will help as well.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: mach3 running Techno CNC LC series 4896
« Reply #2 on: May 18, 2012, 07:51:44 PM »
I don't know alot because it is my highschools but I can find out any details that would be needed
Re: mach3 running Techno CNC LC series 4896
« Reply #3 on: May 18, 2012, 11:14:18 PM »
Pictures would be a good start, any information on the current controls, whether it has steppers or servos... I'm sure there is more but that would be a start.

John