Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: CSScnc on May 18, 2012, 10:48:04 AM

Title: mach3 running Techno CNC LC series 4896
Post by: CSScnc on May 18, 2012, 10:48:04 AM

Can mach3 run a Techno CNC LC series 4896? If so what is required to use it?

Title: Re: mach3 running Techno CNC LC series 4896
Post by: Chaoticone on May 18, 2012, 07:33:18 PM

Hello CSS, welcome to the forum.

Mach can run it but what all you will need to do so is anyones guess.  Help us out by telling us what you have now. If you have any documents or links you can post that will help as well.

Brett

Title: Re: mach3 running Techno CNC LC series 4896
Post by: CSScnc on May 18, 2012, 07:51:44 PM

I don't know alot because it is my highschools but I can find out any details that would be needed

Title: Re: mach3 running Techno CNC LC series 4896
Post by: woodspinner on May 18, 2012, 11:14:18 PM

Pictures would be a good start, any information on the current controls, whether it has steppers or servos... I'm sure there is more but that would be a start.

John