Hello Guest it is March 28, 2024, 09:38:45 PM

Author Topic: Cut circle offsetted??  (Read 6322 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Cut circle offsetted??
« Reply #10 on: June 03, 2012, 10:41:14 AM »
Yall must have different math across the pond. What does Z depth have to do with X Y position calculations ?

Just a tought(;-) TP

Offline BR549

*
  •  6,965 6,965
    • View Profile
Re: Cut circle offsetted??
« Reply #11 on: June 03, 2012, 11:00:06 AM »
NOW I see after looking at the functions. It is not strange math but wording on the function. It is accounting for the Finish cut "Depth of Cut".

Also rememebr this is a circle being cut NOT a circular pocket. A G12/13 works great in that senario.

(;-) TP
Re: Cut circle offsetted??
« Reply #12 on: June 03, 2012, 12:58:16 PM »
strange as it seems i just went out to do it again on my pc and the darn thing is working normal and i didn't change a thing. wierd but i changed some numbers and it still showed the cross hairs in the middle. well im not gonna loose any sleep over it. lol

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Cut circle offsetted??
« Reply #13 on: June 03, 2012, 01:04:47 PM »
You possibly changed the IJ mode in General Config.
Hood