Hello Guest it is March 29, 2024, 06:58:24 AM

Author Topic: weird Z axis behaviour on Panther 210  (Read 2681 times)

0 Members and 1 Guest are viewing this topic.

weird Z axis behaviour on Panther 210
« on: May 06, 2012, 06:19:47 AM »
Hello,

Along with my other issues ("newbie - help with solving backlash issues « 1 2 »"), my Z-axis is behaving strangely.
When using page-up, page-down, the spindle goes randomly up or down - e.g. it moves but not really in relation with the command.
In gcode I have the same issue - the Z axis seems to move randomly up or down when a Znn command is found...

any ideas?

Many thanks

Thomas

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: weird Z axis behaviour on Panther 210
« Reply #1 on: May 06, 2012, 07:31:28 AM »
Thomas,
Can you post the manual for the Panther 210?
Also post the xml you are using for this machine.

RICH