Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ryckmans_t on May 06, 2012, 06:19:47 AM

Title: weird Z axis behaviour on Panther 210
Post by: ryckmans_t on May 06, 2012, 06:19:47 AM
Hello,

Along with my other issues ("newbie - help with solving backlash issues « 1 2 »"), my Z-axis is behaving strangely.
When using page-up, page-down, the spindle goes randomly up or down - e.g. it moves but not really in relation with the command.
In gcode I have the same issue - the Z axis seems to move randomly up or down when a Znn command is found...

any ideas?

Many thanks

Thomas
Title: Re: weird Z axis behaviour on Panther 210
Post by: RICH on May 06, 2012, 07:31:28 AM
Thomas,
Can you post the manual for the Panther 210?
Also post the xml you are using for this machine.

RICH